B&B ARMR B&B Roadway and Security Solutions

Model 828 Shallow Mount Barrier

 

Description

The model 828 vehicle barrier is designed to contain a high-speed vehicle impact and prevent that vehicle from entering a restricted access control area.

 

Model 828 is crash tested to ASTM F2656-15 and achieved a M50 P1 designation capable of stopping a 15,000 lb. (6803.9 kg) vehicle traveling at speeds up to 50 mph (80.5 km/h).

 

Installation of the crash barrier is simple with its shallow-mount design so there is no need for any major excavation work on existing roads or paved surfaces. Model 828 comes complete with all necessary accesses for drains, hydraulic conduits and electrical services to further ease the installation process.  Internal rebar is factory installed.

 

Once constructed, the frame and top plate are finished with a superior rust inhibitor and anti-wear paint for superior corrosion protection.  Minimal road surface area enables extreme vehicle weight capability.

 

Model 828 consists of a cast-in-place shallow foundation frame, raising plate with locking linkage and associated hardware to allow the impact structure to move from horizontal position to a raised, secure position with the aid of an actuator.

 

The barrier is moved to the up (or protective) position with a single, center mounted actuator designed to push on a pivot arm to rotate the top impact structure into position. Multiple actuators including hydraulic, electric or manual are available depending on application requirements.  The standard Model 828 is designed to operate without springs or external counterbalance devices to achieve extremely rapid deployment times.  Top impact structure is developed for simple operation enabling minimal maintenance and rapid replacement after impact if required.

 

Designed for facilities and environments requiring the highest level of perimeter protection, Model 828 is ideally suited for government and military establishments, embassies, and other critical infrastructures vital to our national security, economy, public health, and safety.







Features

  • ASTM F2656 M50 P1 Certification

  • Electric, hydraulic, manual operation

  • Shallow mount design

  • Minimal maintenance

  • Superior corrosion protection

  • Long-term durability

  • Extreme vehicle weight capability

  • Emergency fast operation (<1sec Elect)

  • Custom sizes available

Features

Feature 828
Galvanized Assemblies Std
Up/Down Limit Switch Std
Emergency Fast Operation Std
Loop Detector Std
Master/Remote Control Panel Optional
Safety Motion Detection Optional
Integral Warning Lights Optional
Traffic Light with Pole Optional
Safety IR Beams Optional
Cold Weather Option Optional